CA PLUS SERIES 2
1. DOWNGRADE ERROR
Multi TV Ghana is upgrading their digital boxes software and owners are strongly advised not to switch their decoders off during this process. During this process, the firmware running the decoder is erased and replaced by new firmware that makes the decoder performs better and fixes some loop holes identifies. IT IS STRONGLY RECOMMENDED THAT YOU SHOULD UNDER NO CIRCUMSTANCE SWITCH IT OF. It takes about 5 to 6mins to complete. If by ignorance it is switch off, follow the steps below
-
Switch off the box
-
Remove the coaxial cable that connects the decoder to the dish
-
Switch on the box. This message will be displayed "locking PT"
-
Leave it for about 1 to 2mins. The box will bypass "locking PT" screen and will boot into the main channel menu with this message NO OR BAD SIGNAL
-
Connect the cable whiles the decoder is on.
-
Channels should start showing now
-
Insert the USB Drive at the back of the. (Check the rear of the decoder)
-
Press MENU on remote control
-
Press the RIGH Button two or three times on the remote control until the UTILITY menu is reached
-
Press the DOWN Button to select on the USB
-
Press OK on the USB drive
-
Search, select and press OK on the file copied onto the USB drive (Select on this name YH_CP07_V212_20130606_1714_S.bin)
-
Two upgrades will be displayed, select the second one. Wait for about 2mins till it is done
-
Decoder will be restarted and your problem should be solved now